XP - HF2 - Elliptical High Frequency FMF Wireless Search Coil:

The XP HF2 Elliptical High Frequency FMF Wireless Search Coil is XP's specialized high-frequency coil designed for exceptional sensitivity to small targets, low-conductive targets, gold nuggets, fine jewelry, and difficult targets in mineralized ground.

Featuring a compact 9.5" x 5" / 24 x 13 cm elliptical design, the HF2 combines excellent maneuverability and target separation with an exceptionally broad frequency range reaching all the way to 120 kHz.

Unlike XP's standard FMF coils, which emphasize all-purpose treasure hunting, the HF2 is optimized for situations where small-target sensitivity and high-frequency performance matter most.

For gold prospectors, relic hunters working heavy iron, and detectorists searching difficult terrain where larger coils struggle, the HF2 is one of the most specialized search coils available in XP's FMF ecosystem.

FMF® Fast Multi-Frequency Technology

The HF2 utilizes XP's advanced FMF – Fast Multi-Frequency technology.

Rather than being limited to a traditional single-frequency high-frequency coil, the HF2 combines XP's simultaneous multi-frequency architecture with an exceptionally broad range of selectable operating frequencies.

This allows the coil to maintain the versatility of the XP FMF ecosystem while dramatically expanding high-frequency capability.

Extreme High-Frequency Performance

The defining feature of the HF2 is its frequency range.

The HF2 can operate at frequencies reaching approximately:

120 kHz

This is substantially higher than XP's standard FMF search coils.

Higher frequencies can provide exceptional sensitivity to extremely small and low-conductive targets that may produce weaker responses at lower operating frequencies.

This makes the HF2 particularly well suited for:

• Gold nuggets

• Very small gold

• Fine jewelry

• Thin chains

• Small earrings

• Tiny relics

• Small hammered coins

• Low-conductive targets

• Small metallic targets

Designed for Gold Prospecting

The HF2 is one of the most interesting XP coils for electronic gold prospecting.

Small natural gold can be extremely difficult for conventional coin and relic detectors to detect.

The HF2's extremely high-frequency capability increases sensitivity to small and low-conductive targets, making it particularly useful when searching for:

• Small gold nuggets

• Specimen gold

• Gold in exposed bedrock

• Small gold trapped in cracks

• Gold around old workings

• Small targets in mineralized ground

• Gold around quartz outcrops

• Gold in shallow washes and dry placers

For prospectors using an XP FMF detector, the HF2 provides a much more specialized gold-oriented search coil than XP's standard 9", 11", and 13" x 11" FMF coils.

9.5" x 5" Elliptical Design

The HF2 measures approximately:

9.5" x 5" / 24 x 13 cm

The narrow elliptical footprint provides excellent access to areas where larger round coils struggle.

This makes the HF2 particularly effective around:

• Bedrock cracks

• Exposed bedrock

• Rocks

• Boulders

• Tree roots

• Brush

• Creek beds

• Narrow washes

• Steep terrain

• Old foundations

• Tight spaces

For prospecting, the narrow design allows you to work closer to exposed bedrock and between rocks where small nuggets can be hiding.

Excellent Target Separation

The HF2's narrow detection footprint provides outstanding target separation.

When multiple metallic objects are located close together, a smaller coil analyzes less ground at one time.

This can make it easier to distinguish a desirable target from surrounding iron and trash.

The HF2 is therefore an excellent choice for:

• Heavy iron

• Old mining camps

• Ghost towns

• Cellar holes

• Old home sites

• Trashy parks

• Historic settlements

• Relic sites

Excellent in Heavy Iron

Historic sites can contain enormous concentrations of nails and other ferrous debris.

The HF2's narrow footprint combined with XP's fast recovery characteristics allows the detectorist to carefully work between unwanted iron targets.

This makes the HF2 particularly attractive for searching old mining camps and other historic locations where both small gold and historic relics may be present.

Excellent for Fine Jewelry

The same high-frequency sensitivity that makes the HF2 effective for small natural gold also makes it highly capable of detecting small jewelry.

Potential targets include:

• Thin gold chains

• Small earrings

• Fine rings

• Small pendants

• Broken jewelry

• Small gold items

• Low-conductive jewelry

This makes the HF2 useful beyond prospecting, particularly when searching areas where small jewelry losses are common.

Excellent for Difficult Terrain

The narrow elliptical design is especially useful in rough terrain.

Larger search coils can have difficulty maintaining a consistent distance from the ground when detecting over rocks, roots, uneven bedrock, or steep hillsides.

The HF2's compact footprint makes it easier to keep the coil close to the surface.

This is particularly useful for:

• Mountain prospecting

• Desert washes

• Creek beds

• Exposed bedrock

• Rocky hillsides

• Old mine sites

• Brush-covered terrain

Fully Wireless FMF Coil

Like XP's other FMF search coils, the HF2 contains its own electronics and wireless communication system.

There is no conventional coil cable running up the detector shaft.

The coil communicates wirelessly with the compatible XP controller.

This keeps the detector exceptionally clean and lightweight while eliminating a traditional coil cable.

Rechargeable Battery System

The HF2 incorporates its own rechargeable battery system.

Because the coil contains the electronics necessary for XP's wireless detection architecture, it operates independently from the detector Remote's battery.

Simply recharge the coil as part of your normal XP detector charging routine.

Waterproof Construction

The HF2 is designed for demanding outdoor detecting conditions and can be used in wet environments.

This makes it suitable for applications including:

• Creek prospecting

• River detecting

• Wet bedrock

• Beaches

• Shallow water

• Freshwater environments

• Wet and muddy terrain

When operating an XP wireless coil completely underwater, the appropriate XP underwater antenna/waveguide system may be required because radio-frequency communication does not effectively travel through water.

Product Compatibility

The XP HF2 DELLFMFHP is part of XP's current FMF ecosystem.

Compatible With

• XP DEUS II

• XP DEUS II Remote Control

• XP WS6 Master

• XP WS6 ST Master

• XP ICON

• XP ICON X

XP DEUS II

The HF2 is fully compatible with the XP DEUS II.

When paired with the DEUS II Remote Control, the HF2 provides access to XP's advanced programs and settings while expanding the detector's high-frequency capabilities.

For DEUS II owners interested in prospecting or maximum small-target sensitivity, the HF2 provides a specialized alternative to the standard FMF coils.

XP WS6 Master

The HF2 can also be paired with an XP WS6 operating in Master mode.

The WS6 communicates directly with the search coil and controls the detector without requiring the full DEUS II Remote.

This creates an exceptionally lightweight detector configuration.

XP WS6 ST Master

The newer WS6 ST can also operate as the master controller for the HF2.

This combines the specialized high-frequency coil with XP's compact WS6 ST control system.

XP ICON & ICON X

The HF2 is also compatible with the newer:

• XP ICON

• XP ICON X

This allows the same HF2 search coil to be used across multiple detectors in XP's modern FMF ecosystem.

HF2 vs. Standard XP FMF Coils

HF2 Elliptical

Best for:

• Gold prospecting

• Maximum small-target sensitivity

• Low-conductive targets

• Fine jewelry

• Heavy iron

• Bedrock

• Rocky terrain

• Tight spaces

• Difficult ground

9" D22FMF

Best for:

• Target separation

• Relic hunting

• Heavy iron

• General treasure hunting

• Compact maneuverability

11" D28FMF

Best for:

• General-purpose detecting

• Depth and separation balance

• Coins

• Relics

• Parks

• Fields

• Beaches

13" x 11" D3428FMF

Best for:

• Maximum ground coverage

• Large open areas

• Beaches

• Fields

• Pastures

• Deeper/larger targets

The HF2 is the specialized small-target and high-frequency option within the XP FMF family.

Key Features

• HF2 High Frequency FMF Search Coil

• SKU: DELLFMFHP

• Approximately 9.5" x 5" / 24 x 13 cm elliptical design

• Frequency capability reaching approximately 120 kHz

• FMF Fast Multi-Frequency technology

• Exceptional small-target sensitivity

• Excellent sensitivity to low-conductive targets

• Excellent for gold prospecting

• Excellent for small gold nuggets

• Excellent for fine jewelry

• Excellent target separation

• Excellent in heavy iron

• Excellent around exposed bedrock

• Excellent in rocky terrain

• Excellent in tight spaces

• Fully wireless operation

• Integrated rechargeable battery system

• Waterproof construction

• Compatible with XP DEUS II

• Compatible with XP WS6 Master

• Compatible with XP WS6 ST Master

• Compatible with XP ICON

• Compatible with XP ICON X

• 5-year XP warranty

• Made in France

What's Included – DELLFMFHP

The XP HF2 DELLFMFHP package includes:

• XP HF2 9.5" x 5" High Frequency FMF Wireless Search Coil

• HF2 Coil Cover / Skidplate

• Lower Stem

• Coil Mounting / Screwing Hardware

• Integrated rechargeable coil battery system

• Associated XP factory documentation

The included lower stem is particularly convenient if you own multiple XP coils, allowing you to leave the HF2 mounted to its own lower stem for quicker coil changes in the field.

Built for Small Targets & Difficult Ground

The XP HF2 High Frequency FMF Coil isn't simply a smaller version of XP's standard search coils.

It's a specialized coil designed to expand the capabilities of the XP FMF platform into extremely high frequencies reaching approximately 120 kHz.

That combination of high-frequency sensitivity and a narrow 9.5" x 5" elliptical footprint makes the HF2 particularly well suited for finding small gold nuggets, fine jewelry, low-conductive targets, and difficult targets hidden among iron or rocky terrain.

For gold prospectors, the narrow design is particularly useful for working exposed bedrock, cracks, washes, creek bottoms, old mine sites, and mineralized terrain where larger coils can struggle.

High-frequency FMF performance. Extreme small-target sensitivity. Compact elliptical design. Built for gold, iron, and difficult ground.